Aroma
Keypad / Control Panel Failure
Buttons on the control panel do not respond or only some buttons work intermittently.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Moisture ingress into keypad, Worn membrane switch, Loose ribbon cable between keypad and board, Cracked control panel PCB
How to Fix / Troubleshooting
Safety first: Unplug the cooker before working on the control panel.
- Dry the panel: If the panel was recently cleaned with liquid, leave the unit unplugged for 24 hours to dry.
- Clean surface: Wipe the panel with a slightly damp cloth and then dry. Do not spray cleaner directly onto the panel.
- Reseat ribbon cable: Open the housing and locate the flat ribbon cable from the keypad to the main board. Disconnect and reconnect it carefully.
- Test each button: After reassembly, test all buttons. If specific buttons still fail, the keypad membrane or panel board likely needs replacement.
- Replace control panel: Install a new Aroma control panel assembly if available.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements