Aroma Control Logic / Timer Processing Fault

Display and buttons work, but the countdown timer does not advance; cooker appears stuck at the initial time.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Firmware glitch, Faulty clock crystal on control board, Stuck mode state due to sensor reading, Keypad sending continuous input

Safety first: Unplug the unit before cleaning or opening.

Reset the cooker: Unplug for 10–15 minutes, then plug back in and select a simple program.
Check for stuck buttons: Press each button firmly to ensure none are stuck or continuously pressed.
Test different modes: Try multiple programs. If the timer never advances in any mode, the control board timing circuit may be faulty.
Board replacement: Replace the main control board if the issue persists across resets and modes.

Medium 3/5

Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.