Aroma Intermittent Sensor or Power Connection

Unit beeps repeatedly and cancels cooking when moved or bumped slightly during operation.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose sensor connector, Loose AC input or power cord, Cracked solder joint on control board, Poor lid sensor contact

Safety first: Unplug the cooker before opening the housing.

Stabilize placement: Place the cooker on a solid, level surface where it will not be bumped.
Check power cord fit: Ensure the cord is firmly plugged into both the wall and the cooker (if detachable).
Inspect internal connectors: Open the base and reseat all connectors (sensor, heater, power, lid switch).
Look for cracked joints: Examine the control board for cracked solder joints, especially at heavy components and connectors. Replace the board if damage is found.

Medium 3/5

Wiring Harness

Check Price on Amazon

We may earn a commission from links on this page.