Bella LED / LCD Display Fault

Display is very dim, flickers, or segments are missing, but cooker still heats.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging display module, Loose display connector, Failing display driver on control board, Cracked display solder joints

Safety first: Unplug the cooker before removing the control panel.

Check viewing angle and lighting: Some displays appear dim at certain angles; verify under good lighting.
Inspect display connector: Remove the front panel and reseat the display ribbon or plug on the control board.
Examine solder joints: Look for cracked or dull solder on the display pins; reflowing requires electronics skills.
Replace display/control board: If segments are permanently missing or flickering, replace the display module or entire control board assembly.

Hard 4/5

Display Module / Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.