E11
Bella
Intermittent Sensor or Wiring Connection
E11 is displayed intermittently; cooker may shut off unexpectedly during long programs.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose NTC sensor connector, Partially broken wire in lid hinge harness, Oxidized control board header pins, Vibration causing intermittent contact
How to Fix / Troubleshooting
Safety first: Unplug the unit before accessing internal wiring.
- Re-seat all sensor connectors: Remove the bottom cover and, if accessible, the top cover. Gently unplug and replug the bottom temperature sensor, lid sensor, and pressure sensor connectors to clean contacts.
- Inspect hinge harness: Flex the lid slightly while observing the harness. If E11 appears when the lid is moved, the hinge wiring is likely fractured and should be replaced.
- Check for corrosion: Look for green or white corrosion on connectors. Clean lightly with contact cleaner and a soft brush, then dry thoroughly.
- Secure wiring: Use cable ties to prevent wires from rubbing against sharp metal edges or moving excessively during operation.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Lid Harness / Sensor Wiring Harness
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements