F0
Cuisinart
Factory Calibration / Sensor Reference Error
Display shows F0 and the cooker will not start any program.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Corrupted calibration data in control board, Sensor out of range, Control board failure, Power surge damage
How to Fix / Troubleshooting
Safety first: Unplug the cooker before any extended troubleshooting.
- Power reset: Unplug the unit for 15–20 minutes, then plug back in and attempt to enter Standby and select a basic program.
- Try different outlet: Plug into a known-good outlet without extension cords or power strips to rule out supply issues.
- Check for other symptoms: If the cooker also shows incorrect temperatures or times, the control board may be failing.
- Do not attempt recalibration: Sensor calibration requires factory tools and firmware access. User-level recalibration is not supported.
- Service required: F0 typically requires replacement of the main control board by an authorized service center.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements