ETA No Heating / Open Heater Circuit

Display works but cooker does not heat; food remains cold even after program time.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed main heating element, Open thermal fuse, Loose heater connectors, Faulty heater relay on PCB

Safety first: Unplug before any internal inspection. Heating circuits carry mains voltage.

Confirm symptom: Run a short program with water and check if the pot warms at all.
Internal check (advanced): Remove the bottom cover and inspect heater terminals and wiring for looseness or burning.

When to call a technician: Heater and thermal fuse testing and replacement should be done by a qualified technician.

Professional Required 5/5

Main Heating Element

Check Price on Amazon

We may earn a commission from links on this page.