E14 is displayed and the cooker refuses to start any program.
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Unplug the cooker before any inspection.
- Power reset: Disconnect from mains for 15 minutes, then reconnect and test.
- Drying (if moisture suspected): If the cooker was exposed to heavy steam or spills, leave it unplugged in a dry, warm room for 24 hours.
When to call a technician: Firmware reprogramming or control board replacement is required for persistent E14 and must be performed by ETA service personnel with the correct tools and software.
Repair Difficulty
Required Part
We may earn a commission from links on this page.