ETA Keep-Warm Temperature Too High

Keep-warm function overheats food, causing drying or burning at the bottom.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Sensor miscalibration, Poor thermal contact between pot and heater, Firmware issue, Damaged NTC sensor

Safety first: Unplug before internal inspection.

Check pot contact: Ensure the inner pot base is flat and clean for accurate temperature sensing.
Use shorter keep-warm: Manually turn off keep-warm after a shorter period or use lower-temperature programs if available.

When to call a technician: Persistent overheating on keep-warm suggests a control or sensor fault that should be professionally diagnosed.

Medium 3/5

Bottom NTC Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.