Gorenje Display Module Degradation or Power Supply Issue

Display is very dim, flickering, or some segments are missing, but cooker otherwise works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging LED/LCD display, Poor solder joints on display connector, Weak low‑voltage supply on PCB, Damaged display ribbon

Safety: Unplug before accessing the control board.

Check mains voltage: Ensure the supply voltage is within the specified range; low voltage can cause dim displays.
Inspect display connector: Remove the control panel and reseat the display connector or ribbon cable.
Reflow solder joints: If you have soldering skills, inspect and reflow cracked joints on the display pins. Otherwise, replace the PCB.
Replace display/PCB: If the display itself is failing, replace the display module or the entire control board assembly, depending on design.

Medium 3/5

Display / Control Board Assembly

Check Price on Amazon

We may earn a commission from links on this page.