Hamilton Beach
Premature Temperature Cutoff / Dry Boil Protection
Unit switches to Keep Warm too early and never reaches full pressure.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Insufficient liquid in inner pot, Excessive scorching on bottom causing overheat detection, Faulty overheat thermostat or sensor, Warped inner pot causing hot spots
How to Fix / Troubleshooting
Safety first: Allow the cooker to cool before inspecting.
- Verify recipe liquid: Ensure you are using at least the minimum liquid recommended by Hamilton Beach for pressure cooking.
- Clean pot and plate: Remove any burnt-on residue from the inner pot and heating plate.
- Check inner pot flatness: Replace the inner pot if it does not sit flat on the heating plate.
- Sensor/thermostat check: If the problem occurs even with adequate liquid and clean surfaces, the overheat thermostat or bottom temperature sensor may be overly sensitive and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Overheat Thermostat on Heating Plate
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements