Hisense Premature Cooking Cycle Termination

Multicooker switches to Keep Warm too early; rice or food is undercooked.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Incorrect program selection, Faulty temperature sensor, Loose inner pot causing poor heat transfer, Firmware miscalculation

Safety first: Unplug and cool the cooker before internal checks.

Verify program: Ensure you are using the correct Hisense program for the food type and quantity.
Check pot contact: Make sure the inner pot is fully seated and not lifted by debris underneath.
Clean sensor and plate: Remove any residue from the heating plate and sensor area.
Sensor replacement: If the issue persists across programs, replace the bottom NTC sensor.

Medium 3/5

Bottom NTC Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.