Instant Pot
Keypad / control panel failure
Display lights up but buttons are unresponsive or only some keys work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Moisture under control panel, Damaged touch membrane, Loose ribbon cable between panel and PCB, Faulty control board input circuit
How to Fix / Troubleshooting
Safety: Unplug the unit before attempting to dry or inspect.
- 1. Power reset: Unplug for 10–15 minutes, then reconnect and test the buttons again.
- 2. Drying period: If the panel was exposed to steam or splashes, allow the cooker to sit unplugged for 24–48 hours in a dry environment.
- 3. Test all buttons: Systematically press each key to identify if the failure is localized (one area) or global (entire panel).
- 4. Avoid pressing too hard: Excessive force can damage the touch membrane.
- 5. Professional repair: A technician can open the housing, reseat the control panel ribbon cable, and replace the keypad overlay or main PCB if necessary.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Control Panel / Keypad Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements