Display shows 'noPr' and the Instant Pot fails to reach or maintain pressure.

Safety: Cancel the program and allow any pressure to release before opening.

• 1. Verify steam release position: Ensure the steam release handle or switch is set to Sealing.
• 2. Check liquid level: Confirm there is at least the minimum required liquid in the inner pot.
• 3. Inspect sealing ring and lid rim: Clean and reseat the silicone sealing ring. Wipe the pot rim and lid contact surfaces.
• 4. Free the float valve: Push the float valve up and down from inside the lid to ensure it moves freely. Clean any residue and confirm the silicone cap is intact.
• 5. Run a water test: If 'noPr' persists with water only, replace the sealing ring and test again. Continued failure suggests a lid or pressure sensor issue requiring service.