Kenmore Pressure Switch / Sensor Error

F5 error appears during pressure cooking; unit may shut down.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Defective pressure sensor, Loose pressure sensor tube (if pneumatic type), Corroded sensor connector

Safety first: Unplug and fully depressurize the cooker before inspection.

Inspect sensor tube (if present): Some models use a small silicone tube from the lid to a pressure sensor. Ensure it is not cracked or disconnected.
Check connector: Access the control board and verify the pressure sensor connector is secure.
Clean area: Remove any condensation or corrosion around the sensor.

If F5 persists, the pressure sensor module should be replaced.

Hard 4/5

Pressure Sensor

Check Price on Amazon

We may earn a commission from links on this page.