noP
Kenmore
Pressure Not Reached
Display shows 'noP' or 'no pressure' and unit cancels the pressure program.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Insufficient liquid, Lid not sealed properly, Defective pressure sensor, Steam release valve mispositioned
How to Fix / Troubleshooting
Safety first: Avoid leaning over the cooker during preheat; steam can escape suddenly.
- Verify liquid level: Ensure at least the minimum required liquid (often 1–2 cups) is in the pot.
- Check lid and gasket: Reseat the sealing ring and close the lid firmly. Confirm the steam release is in Sealing position.
- Clean vent components: Remove and clean the steam release valve and anti-block shield to ensure they are not stuck open.
- Test with water only: Run a short pressure cycle with water. If 'noP' still appears, the pressure sensor or heating system may be faulty.
Persistent 'noP' errors after gasket and vent cleaning typically require pressure sensor or heating element diagnostics and replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Pressure Sensor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements