Kenwood Display Module / Power Supply Degradation

Display is dim, flickering, or segments are missing, but cooking still works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging electrolytic capacitors on control PCB, Loose display ribbon cable, Damaged LED/LCD display module, Voltage drop in low-voltage supply

Safety first: Unplug before opening the control panel area.

Check power source: Try a different outlet to rule out low mains voltage.
Inspect display connection: Remove the top or front cover to access the display. Ensure the ribbon cable or connector is firmly seated.
Look for damage: Inspect the display board for corrosion or moisture marks, especially if the unit has been exposed to steam.

If the display remains dim or partially missing, the display module or control PCB will need replacement.

Hard 4/5

Display Module / Control PCB

Check Price on Amazon

We may earn a commission from links on this page.