Lagostina Voltage Drop / Poor Electrical Connection

Display and lights flicker or dim when the heater cycles on and off.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Loose power cord connection, Weak wall outlet, Internal connector partially unplugged, Failing power supply components on board

Safety first: Unplug before inspecting wiring.

Try another outlet: Plug the cooker into a different, known-good outlet without an extension cord.
Inspect power cord and plug: Look for looseness or heat marks. Replace if suspect.
Check internal connectors (advanced): Remove the bottom cover and reseat all multi-pin connectors on the control board.

If flickering continues on a good circuit, the internal power supply on the control board may be failing and should be replaced.

Hard 4/5

Power Cord / Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.