Mealthy
No Power / Dead Unit
Multicooker does not power on at all; no lights or display when plugged in.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty power outlet, Blown internal fuse on control board, Damaged power cord, Loose AC input wiring
How to Fix / Troubleshooting
Safety first: Ensure your hands are dry. Do not open the unit while it is plugged in.
- Check outlet: Plug another appliance into the same outlet to confirm it has power. Reset any tripped breakers.
- Test without extension cords: Plug the Mealthy multicooker directly into a wall outlet.
- Inspect power cord: Look for visible damage, cuts, or burn marks. Replace the cord if damaged.
- Check internal fuse (advanced): Unplug the cooker, remove the bottom cover, and locate the inline or board-mounted fuse near the AC input. Test continuity with a multimeter. Replace with the same rating if blown.
- Inspect AC wiring: Ensure all AC connections are tight on the terminal block and control board.
Warning: If the fuse blows again immediately, there is likely a short on the control board or heating element; seek professional service.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements