Moulinex
Display / Backlight Failure
Display is very dim, flickering, or segments are missing, but cooker still heats.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LEDs or LCD backlight, Loose display connector, Partial failure of display PCB, Low-voltage regulator issue
How to Fix / Troubleshooting
Safety first: Unplug before any inspection.
Steps:
- Power reset: Unplug for a few minutes and reconnect to rule out a transient glitch.
- Check viewing angle: Some LCDs appear dim from certain angles; verify from straight on.
If the display remains dim or incomplete, the display board or its connector is likely failing. Replacement requires opening the control panel and should be done by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements