P2
Moulinex
Keypad / Control Panel Communication Error
Display shows P2 and the cooker may freeze or not allow program selection.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose ribbon cable between keypad and main board, Moisture under touch panel, Failed keypad PCB
How to Fix / Troubleshooting
Safety first: Unplug the appliance.
Actions:
- Dry the panel: If the control panel was wiped with a very wet cloth, allow it to dry for several hours. Do not use the cooker until fully dry.
- Check for stuck buttons: Gently press each button to ensure none are physically stuck or jammed.
- Power reset: After drying, plug in and test again.
If P2 remains, the keypad or its cable is likely defective and must be replaced. This involves opening the housing and should be done by a technician.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Keypad / Control Panel PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements