ProCook Keep-Warm Temperature Too High

Keep-warm function overheats food, causing it to dry out or burn around the edges.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Misreading temperature sensor, Firmware calibration issue, Poor thermal contact between pot and sensor, Warped inner pot

Safety first: Unplug and cool the cooker before inspection.

Check pot condition: Ensure the inner pot base is flat and clean for accurate temperature sensing.
Avoid extended warm times: Manually turn off keep-warm after a reasonable period to prevent drying.
Sensor contact (advanced): Verify the NTC sensor is firmly attached to the heating plate.
Service if severe: If keep-warm is excessively hot even with a good pot, the sensor or PCB may need replacement.

Medium 3/5

NTC Temperature Sensor

Check Price on Amazon

We may earn a commission from links on this page.