Redmond Abnormal Pressure Drop / Sensor Discrepancy

P2 error appears; cooker aborts pressure program shortly after starting.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Intermittent pressure sensor connection, Loose lid causing periodic leaks, Faulty pressure sensor calibration

Safety first: Allow the unit to cool and depressurize before working on it.

Verify lid and gasket: Ensure the lid is locked firmly and the gasket is correctly seated in its groove.
Inspect sensor wiring: Access the pressure sensor and check that its connector is tight and wires are not moving excessively when the lid is handled.
Replace sensor if needed: If P2 persists with a good seal, replace the pressure sensor with a Redmond-compatible part.

Medium 3/5

Pressure Sensor / Lid Gasket

Check Price on Amazon

We may earn a commission from links on this page.