Russell Hobbs
Pot detection failure (on models with pot sensor)
Inner pot does not detect; cooker shows no response or refuses to start when pot is inserted.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty pot presence microswitch, Bent pot support plate, Broken pot detection wiring, Control PCB input fault
How to Fix / Troubleshooting
Safety: Unplug before internal inspection.
Steps:
- Check pot type: Use only the original Russell Hobbs inner pot; some sensors rely on specific dimensions or materials.
- Inspect support plate: Ensure the pot support plate is not bent downwards; gently bend back if necessary so the pot presses the switch.
- Locate and test switch: Open the base and find the pot detection microswitch under the heating plate. Press it manually and listen for a click. Replace if it does not operate cleanly.
Repair: Replace the pot detection microswitch or adjust its mounting position as needed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Pot Detection Microswitch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements