Salter Premature Cycle Termination

Display shows correct time but cooking ends prematurely before the timer reaches zero.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Overtemperature detected by NTC, Intermittent power loss, Faulty lid or pressure sensor reporting unsafe condition, Loose internal connectors

Safety first: Allow the cooker to cool before opening the housing.

Check for overheating: Ensure vents are clear and the cooker is not enclosed in a cabinet.
Inspect connectors: Open the housing and reseat connectors for the NTC sensors, lid switch, and pressure sensor.
Monitor power: Try a different outlet to rule out mains interruptions.

If premature stopping continues, the control PCB may be misinterpreting sensor data and should be evaluated or replaced.

Medium 3/5

Main Control PCB

Check Price on Amazon

We may earn a commission from links on this page.