Salton
Keypad / Control Panel Failure
Buttons on the control panel do not respond or respond intermittently.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Moisture ingress behind control panel, Worn or damaged membrane keypad, Loose ribbon cable between keypad and main PCB, Faulty touch sensor IC on control board
How to Fix / Troubleshooting
Safety: Unplug the cooker before accessing the control panel.
- Dry the panel: If the panel was exposed to steam or spills, allow the unit to dry in a warm, dry place for 24 hours and test again.
- Clean surface: Wipe the control panel with a soft, slightly damp cloth and dry. Do not use excessive water or harsh chemicals.
- Check ribbon cable: Remove the outer housing to access the back of the control panel. Ensure the flat ribbon cable is fully seated in its connector on the main PCB.
- Test individual buttons: Press each button firmly and observe if any respond. Non-responsive buttons on an otherwise working panel may indicate a failing membrane that needs replacement.
If multiple buttons remain unresponsive despite good connections, the keypad assembly or control PCB should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel Keypad
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements