Sencor
Display Module / Backlight Failure
Display is dim, flickering, or some segments are missing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LED/LCD display, Loose display connector, Failing display driver on PCB, Cracked display glass from impact
How to Fix / Troubleshooting
Safety: Disconnect from mains before accessing the display area.
- Check viewing angle: Confirm that the dimness is not just due to viewing angle or bright ambient light.
- Inspect connections: Remove the control panel and reseat the display connector or ribbon cable.
- Look for damage: Examine the display for cracks or moisture. Replace the display module if physically damaged.
- Replace PCB: If the display itself is intact but segments are missing or flickering, the display driver on the control PCB may be failing and the board should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements