E11
Sencor
Inner Pot Detection / Pot Presence Fault
E11 error appears when trying to start a program; cooker may beep continuously and refuse to start.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Deformed or non‑original inner pot, Dirty or oxidized pot detection contacts, Faulty pot detection microswitch or sensor, Misaligned inner pot support springs
How to Fix / Troubleshooting
Safety: Unplug the cooker before accessing internal mechanisms.
- Use original pot: Ensure you are using the original Sencor inner pot designed for your model. Third‑party pots may not trigger the detection system correctly.
- Clean contact points: Remove the inner pot and clean the heating plate and any visible contact pins or springs with a dry cloth. Remove food residue and oxidation.
- Check pot fit: Place the pot back and press down gently. It should sit evenly and depress any spring‑loaded supports.
- Inspect detection switch (advanced): From the underside, locate the pot detection switch or sensor under the heating plate. Verify that pressing the plate actuates the switch. Adjust or replace the pot detection switch if it does not click or change state on a multimeter.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Inner Pot Detection Switch
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements