SilverCrest Start Circuit / Keypad Input Failure

Multicooker powers on but will not start any program; pressing Start does nothing.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Defective Start button on keypad, Loose keypad ribbon cable, Firmware lock-up, Child lock function engaged

How to Fix / Troubleshooting

Safety first: Unplug before opening the control panel.

  • Check user settings: Consult the manual to see if a child lock or key lock feature is enabled. Disable it using the specified key combination.
  • Panel reset: Unplug the cooker for 5–10 minutes, then plug back in and try again.
  • Inspect keypad: Remove the front panel and check the Start button area for physical damage or contamination. Clean with a dry cloth.
  • Ribbon cable: Reseat the ribbon cable between the keypad and main board.
  • Replace keypad: If the Start button does not register (no click or no change in resistance when pressed), replace the keypad/touch panel.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Keypad / Touch Control Panel
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements