Steba
Display Module or Connection Fault
Display is blank or segments are missing, but cooker appears to heat and operate.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose display ribbon cable, Failed LED/LCD display module, Cracked solder joints on display board, Control panel PCB damage
How to Fix / Troubleshooting
Safety first: Unplug the cooker before accessing the display.
Steps to restore display:
- 1. Check brightness setting (if available): Some models allow dimming; ensure it is not set to minimum.
- 2. Access display board: Remove the control panel cover to expose the display PCB.
- 3. Reseat connectors: Gently unplug and replug the ribbon cable between the main PCB and display board.
- 4. Inspect for damage: Look for cracked solder joints at the display pins. Re-solder if skilled, or replace the display PCB.
- 5. Replace display module: If segments are permanently missing, install a new display module compatible with your Steba model.
The cooker may still function without a display, but safe operation is compromised; repair is recommended.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Display PCB / LED-LCD Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements