Steba
Cooling Fan Failure (for models with internal fan)
Fan (if equipped) is noisy or does not run; top or sides of cooker become unusually hot.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Dust buildup in fan, Fan motor failure, Obstructed fan blades, Loose fan connector
How to Fix / Troubleshooting
Safety first: Unplug the cooker before accessing internal components.
Steps to service cooling fan:
- 1. Confirm fan presence: Not all Steba multicookers have a fan. If your model does, you may hear it during operation.
- 2. Access fan: Remove the top or side cover (model-dependent) to reach the fan assembly.
- 3. Clean fan: Use a soft brush and compressed air to remove dust from the blades and housing.
- 4. Check rotation: Spin the fan gently by hand; it should move freely. If stiff or seized, replace the cooling fan motor.
- 5. Verify wiring: Ensure the fan connector is firmly attached to the PCB.
Overheating due to a failed fan can shorten the life of internal components; repair promptly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements