T-fal Display Module Degradation or Power Supply Issue

Display is very dim, flickering, or some segments are missing.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging LED/LCD display, Poor connection between display and PCB, Weak low-voltage supply, Cracked solder joints

Safety first: Unplug the cooker before opening the control housing.

Checks (advanced):

Remove the front panel to access the display module.
Inspect the connector between the display and PCB; reseat if possible.
Examine solder joints under the display for cracks and reflow if you are qualified.

If the display itself is failing, replace the display board or the entire control panel assembly, depending on model design.

Hard 4/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.