T-fal Overheating Electrical Components

Strong electrical or burning smell from the cooker during use.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Dust or grease burning on heating plate, Failing wiring insulation, Overheating control board, Shorted component

Safety first: Immediately unplug the cooker. Do not continue using it until the cause is identified.

Inspection (advanced):

After cooling, remove the bottom cover and inspect for burnt wires, melted insulation, or scorched PCB areas.
Clean any accumulated dust or grease from the heating plate and interior surfaces.
If any component appears burnt or melted, the unit should be serviced professionally and the damaged parts replaced.

Professional Required 5/5

Internal Wiring Harness

Check Price on Amazon

We may earn a commission from links on this page.