OVR
Wolf Gourmet Overfill or Boil-Over Detection

Display shows an overfill/overflow warning (e.g., "OVR" or similar) and cooking is interrupted.

Advertisements

Possible Causes

Inner pot filled above MAX line, Foamy foods (starches, beans) expanding excessively, Liquid entering lid sensor or steam path, Pressure sensor detecting unstable conditions

How to Fix / Troubleshooting

Safety first: If under pressure, allow the cooker to depressurize according to the manual before opening.

  • Check fill level: Open the lid and verify that food and liquid are below the MAX fill line indicated on the Wolf Gourmet inner pot. For pressure cooking, do not exceed 2/3 full, and for foamy foods, stay at or below 1/2 full.
  • Reduce foaming: For beans, grains, and starchy foods, add a small amount of oil and avoid over-stirring before cooking. Skim foam if necessary.
  • Clean lid components: Remove and clean the steam release valve, anti-block shield, and gasket to remove any residue from boil-overs.
  • Restart with proper volume: Adjust the recipe volume and try again. If the overfill warning appears even with low volume and water only, the pressure or overfill sensor may be malfunctioning.
Advertisements

Repair Difficulty

Very Easy 1/5
Advertisements