Zavor Display / LED Module Degradation

Display is dim, flickering, or segments are missing, but cooker still heats.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Aging LED display, Loose display connector, Voltage regulator issue on control board, Heat damage behind panel

Safety first: Unplug the cooker before accessing the control panel.

Check viewing angle: Confirm the issue is not just angle-related; view the display straight on.
Inspect connections (advanced): Open the control panel and ensure the display module connector is firmly seated.
Look for heat damage: Check for discoloration or warped plastic behind the display.
Replace display or board: If the display remains dim or incomplete, replace the display module or entire control board assembly as specified by Zavor.

Medium 3/5

Display / Control Panel Assembly

Check Price on Amazon

We may earn a commission from links on this page.