Zavor
No Power / Dead Unit
Multicooker does not power on at all; display is blank.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty power cord, Blown internal fuse, Failed main control board, Defective power switch (if equipped)
How to Fix / Troubleshooting
Safety first: Unplug the cooker before inspecting the cord or opening the housing.
- Check outlet: Test the wall outlet with another appliance to confirm power is available.
- Inspect power cord: Look for cuts, kinks, or burn marks. Replace the cord if damaged.
- Try another outlet: Plug the cooker into a different known-good outlet, avoiding power strips if possible.
- Internal fuse (advanced): If still dead and out of warranty, remove the bottom cover and check the internal fuse on the control board. Replace only with the same rating.
- If no improvement: The main control board is likely faulty and should be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements