F11
AEG
Mode Selector / Function Relay Fault
F11 error, oven functions may be limited, some heating modes unavailable.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed function selector relay on control board, damaged mode selector encoder (on knob models), wiring fault between selector and board
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the control panel or knobs.
- Check selector operation: Rotate the function knob through all positions. If some positions do not register on the display or cause F11, the selector or its encoder may be faulty.
- Inspect knob and shaft: Remove the knob and check for cracks or slipping on the shaft. Replace the knob if it does not firmly engage.
- Access selector/encoder: Remove the front panel to access the selector switch or encoder. Check for loose mounting screws and secure connectors.
- Board relays: On relay-controlled models, listen for relay clicks when selecting different modes. No click for a particular mode suggests a failed relay on the board, requiring board repair or replacement.
Warning: Miswiring the selector can cause incorrect heating modes and potential overheating. Label wires before removal.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Function Selector Switch / Encoder
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements