AEG Display Backlight / LCD Failure

Oven display is blank or very dim, but the oven still heats when a function is selected (on knob-based models).

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed display module, blown display backlight LED/lamps, faulty display power supply on control board, loose display connector

Safety first: Disconnect power before removing the control panel.

Check brightness settings: Some AEG models allow dimming; ensure brightness is not set to minimum.
Inspect connectors: Remove the control panel and reseat the display connector on the control board.
Module replacement: If the display remains blank or unreadable, replace the display module or the combined control panel assembly as per AEG parts list.

Warning: Operating the oven without a readable display can lead to incorrect settings; repair promptly.

Medium 3/5

Display Module

Check Price on Amazon

We may earn a commission from links on this page.