AEG
Door Hinge / Hinge Support Wear
Oven door does not close properly or sags, causing heat to escape.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn door hinges, bent hinge arms, damaged hinge receivers in cabinet, loose hinge screws
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool before working on the door.
- Check hinge play: Open the door halfway and gently lift. Excessive movement indicates worn hinges.
- Inspect hinge seats: Remove the door (usually by opening fully and lifting off or releasing hinge locks) and inspect the hinge receivers in the oven frame for damage.
- Replace hinges: Install new AEG-compatible hinges in pairs to ensure even closing. Transfer any mounting plates as needed.
- Adjust alignment: After refitting, check that the door seals evenly all around. Adjust hinge screws if possible.
Warning: Oven doors are heavy and glass can break if dropped. Support the door with both hands during removal.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge Set
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements