F1E0
Amana
Internal EOC failure
Oven displays F1E0 shortly after power-up; oven functions may be disabled.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective electronic oven control board, Power surge damage, Internal memory or processor fault
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before accessing the control board.
Step-by-step checks:
- Power reset: Turn the breaker OFF for 5–10 minutes, then back ON. If F1E0 returns immediately, the control is likely bad.
- Inspect control: Remove the control panel and visually inspect the EOC for burnt components, bulged capacitors, or scorch marks.
- Check wiring: Ensure all harness connectors are fully seated and not reversed. Compare to the wiring diagram.
- Replace EOC: If no external cause is found and the error persists, replace the EOC with the correct Amana part number. Transfer each connector one at a time to the new board.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Electronic Oven Control Board (EOC)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements