F7E1
Amana
Convection fan or fan relay failure
Oven displays F7E1; may be associated with convection or fan functions.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open or seized convection fan motor, Failed fan relay on EOC, Wiring issue to convection fan
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing the rear panel or fan area.
Step-by-step checks:
- Listen for fan: During a convection bake, the fan should run. If it does not, access the fan motor behind the rear oven wall or rear panel.
- Test motor: Measure resistance across the fan motor terminals. An open circuit indicates a bad motor.
- Check wiring: Inspect the harness from the EOC to the fan motor for damage.
- Replace parts: Replace the convection fan motor if defective. If the motor and wiring are good but the fan never receives power, replace the EOC.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Convection Fan Motor or Electronic Oven Control Board (EOC)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements