Amana
Door alignment or hinge failure
Oven door will not close fully; heat escapes and temperature is unstable.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent or worn door hinges, Weak hinge springs, Misaligned door, Damaged door gasket preventing full closure
How to Fix / Troubleshooting
Safety first: Ensure the oven is cool before working on the door.
Step-by-step checks:
- Inspect hinges: Open the door and check both hinges for bending, cracks, or missing hinge locks. If the door sags or feels loose, hinges may be worn.
- Check gasket: Inspect the door gasket for bulges or hardened sections that prevent full closure. Replace if deformed.
- Hinge replacement: Remove the door by opening it to the broil stop position and lifting it off the hinges (refer to manual). Replace both hinges as a set with the correct Amana parts.
- Reinstall door: Carefully reinstall the door onto the new hinges and test closure. Adjust as needed.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinges or Door Gasket
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements