Asko
No Power to Control
Oven display is completely dead; no lights, no response to buttons.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or blown fuse, Loose connection at terminal block, Failed power filter board, Defective main control board power supply
How to Fix / Troubleshooting
Safety first: Verify the breaker is off before opening any panels. This fault involves mains voltage.
- Check household breaker: Reset the breaker and see if it trips again. If it does, there may be a short in the oven.
- Inspect terminal block: Remove the rear cover and check for loose or burned connections. Tighten and replace the block if necessary.
- Internal fuses: Some Asko ovens have internal fuses on the power filter or control board. With power off, check and replace blown fuses with the exact type and rating.
- Control board power supply: If power is present at the terminal block but the control is dead, the main control board's power supply is likely faulty and the board must be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control Board
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements