Display shows DOOR or a flashing door icon; oven will not start a self‑clean or bake cycle.

Safety first: Turn off power if you will adjust hinges or remove panels.

• Check door closure: Open and close the door firmly. Ensure nothing is blocking the door gasket or frame.
• Inspect hinges and latch: Look for sagging hinges or a bent latch that prevents the door from fully engaging the switch.
• Test door switch: Access the door switch (usually behind the front frame) and test for continuity when the door is closed. Replace if it does not change state.
• Adjust or replace parts: Adjust hinges if possible or replace the door switch or door latch if defective.