Avanti
Failed Output Stage of Control
Timer and clock work, but oven will not start any cooking function (no relay click, no heat).
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Defective bake and broil relays on EOC, Open line relay, Miswired control after repair, Faulty selector switch (manual models)
How to Fix / Troubleshooting
Safety first: Disconnect power before accessing the control board or selector switch.
- Listen for relays: When starting a bake or broil, you should hear a click from the control. If not, suspect the EOC or selector.
- Check wiring: Verify that all wires are correctly connected to the EOC and selector switch according to the wiring diagram.
- Test selector switch: On manual‑control Avanti ovens, test the selector switch contacts for continuity in each position. Replace if faulty.
- Replace EOC: If the selector is good and no outputs are energized, replace the electronic oven control (EOC).
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Electronic Oven Control (EOC)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements