Balay
Door glass seal / ventilation issue
Oven door glass fogging, moisture or streaks between inner and outer glass panes
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed inner glass seal, Blocked door ventilation channels, Loose glass retaining clips, Previous door disassembly not sealed correctly
How to Fix / Troubleshooting
Safety: Disconnect power and allow the oven to cool. Handle glass carefully to avoid breakage.
- Check door vents: Inspect the door ventilation slots at the top and bottom. Clean any grease or debris blocking airflow.
- Door disassembly: Remove the door (usually by opening to a specific angle and releasing hinge locks) and lay it flat on a soft surface. Carefully remove screws to separate the inner and outer glass.
- Clean glass: Clean both sides of the glass panes with a non-abrasive cleaner. Dry thoroughly.
- Inspect seals: Check any foam or silicone seals around the inner glass. Replace if degraded or missing.
- Reassemble: Refit the glass and ensure all clips and screws are secure. Reinstall the door and test for reduced fogging in normal use.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Glass Seal
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements