F60
Bauknecht
Relay Sticking / Contact Error
Oven shows F60, grill or oven light may flicker, sometimes accompanied by buzzing from control area.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Worn or pitted relay contacts on control board, Overheated relay due to high load, Cold solder joints on relay pins, Incorrect mains wiring causing overload
How to Fix / Troubleshooting
Safety first: Isolate the oven from mains before accessing the control board.
- Listen for relay: When the oven is commanded to heat (under safe test conditions), a clicking sound should be heard from the control board. No click or continuous buzzing suggests relay issues.
- Visual inspection: Remove the control board and inspect the heater relays for discoloration or melted plastic. Check solder joints for cracks.
- Board replacement: For most users, replace the entire control board rather than individual relays, to ensure reliability.
- Check load: Verify that the connected heating elements are correct type and rating; incorrect parts can overload relays.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Electronic Control Board (Relay Section)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements