E11
Beko Cooling Fan Temperature Control / Sensor Fault

Beko oven shows E11 and the cooling fan runs continuously or not at all, regardless of oven temperature.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Faulty cooling fan thermostat (if separate from main sensor), Stuck cooling fan relay on PCB, Wiring fault to cooling fan, Failed cooling fan motor drawing excessive current

How to Fix / Troubleshooting

Safety first: Isolate the oven from mains power. Cooling fan components are near hot surfaces; allow cooling.

Check cooling fan and thermostat:

  • Remove the top cover of the oven to access the cooling fan and any associated thermostat or thermal switch.
  • Inspect the fan blades for obstruction (insulation, wiring) and check that the fan spins freely by hand.
  • Test the cooling fan motor for continuity and insulation damage; replace if open or shorted.
  • If a separate cooling thermostat is fitted, test it for correct operation (closed when hot, open when cool, depending on design) using a multimeter and a heat source (carefully).
  • Inspect wiring and connectors between the fan, thermostat, and PCB.
  • If hardware is good, the PCB relay controlling the fan may be stuck or failed and the board may need replacement.

Warning: Do not operate the oven with the top cover removed; hot air and live parts will be exposed.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Oven Cooling Fan Motor
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements