E13
Beko Clock / Timer Circuit Fault

Beko oven shows E13 and the clock/timer cannot be set or loses time frequently.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Internal failure of clock/timer module, Power supply instability on PCB, Damaged backup capacitor or battery (if fitted), Loose wiring to timer module

How to Fix / Troubleshooting

Safety first: Disconnect the oven from mains power before removing the control panel.

Basic reset:

  • Isolate the oven for 10–15 minutes to fully discharge the electronics, then restore power and attempt to set the clock again.

Module inspection:

  • Remove the control panel fascia to access the clock/timer module (often integrated with the display).
  • Check connectors for secure fit and signs of heat damage.
  • If the timer is a separate module, verify that it receives correct supply voltage from the main PCB.
  • If the timer continues to malfunction, replace the clock/timer or UI module as a complete unit.

Warning: Incorrect wiring of the timer module can prevent the oven from heating. Label all connectors before removal.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Clock / Timer Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements