Beko
Cooling / Ventilation Deficiency
Oven control panel or knobs become extremely hot to touch during normal cooking.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cooling fan, Blocked ventilation slots, Missing or incorrectly fitted trim pieces, Poor installation clearance
How to Fix / Troubleshooting
Safety first: Turn off the oven and allow it to cool. Risk of burns and damage to electronics.
Checks:
- Verify that the cooling fan runs when the oven is hot; if not, test and replace the cooling fan motor or thermostat.
- Ensure that all front and rear ventilation slots are clear of obstructions.
- Check that decorative trims and seals are correctly fitted and not blocking airflow.
- Confirm that the oven has been installed with the clearances specified in the Beko installation manual.
Warning: Persistent overheating of the control area can lead to premature failure of the electronics.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements